Digital Counter

Preset Digital BCD Counter

The basic digital circuits are Flip Flop and Counter, both are simulated here for you to try out. This circuit can be cascaded to make even a 6 digit event counter, even a simple frequency counter can be made.

These are best done with microcontrollers today. Then what if you have to design your own microcontroller on a FPGA, so the basics have to be sound, hence you have to know what gates, flip flops and counters are.


Counter Lab

The Counter can be tested by clicking the buttons given below, Watch the LEDs and seven segment display. Inc, Dec, and Set buttons are momentary acting and Clk Button is latching  type. The Dip Switch  in the Left also can be set by clicking on each of them, watch the switch and LEDs after a click.

a. - Set the DIP Switch as you like and then Press the Set button.  Now you will see the BCD value in the yellow LEDs named 4029 output. The Decimal value will be seen in the seven segment Display. Now try for different dip switch settings and see the BCD LEDs and Decimal output.

b. - Now Press The Inc and Dec pushbuttons and See the corresponding green LEDs which indicate the state of the Nand gate 4093 Flip Flop. Set it to Increment up-count or Decrement which is down-count.

c. - Now Click the Clk - clock or count button, the switch will latch, press it again to release.  If you toggle  it once the counter will get a single pulse and it will count it, see the BCD and decimal displays. Now  you turn it on and leave it,  the counter will keep counting one per second till you turn it off, the clock nand gate is wired to be an oscillator.

The Gadget to learn with Digital BCD Counter xml code. Below is shown the canvas view. I added this view to this tutor today 26th Mar 2010. You can Operate the Widget below and see the response.

Tutor Digital up down BCD counter that will help you take the first step in digital electronics. Old page of counter.